Dehydration dryer Product List and Ranking from 7 Manufacturers, Suppliers and Companies

Wastewater and waste liquid reduction dehydration and drying device "V-cycle"

Case of reducing processing costs by 12.5 million yen! Free sample tests are currently being conducted!

By reducing the wastewater and waste liquids that are sent outside the company as industrial waste, we can achieve zero emissions and reduce processing costs. We are also conducting free treatment tests for wastewater samples! 【Benefits of Implementation】 ◆ Significantly reduce industrial waste disposal costs! * In the case of 4 tons per day, a cost reduction of 12.5 million yen annually (see downloadable materials) ◆ Reduce the amount of wastewater and waste liquids by over 90%! ◆ Contribute to zero emissions!

Company：コスモトレードアンドサービス
Price：Other

Wastewater/wastewater treatment equipment
Water treatment equipment
Oil-water separator
Dehydration dryer

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Decompression dehydration drying device

Reduce factory wastewater by over 96%! Lower industrial processing costs and expand the scope of wastewater reuse.

At Kowa Shoji, we handle the "Vacuum Dehydration Drying Device" that purifies waste liquid through dehydration and drying. This device separates moisture from concentrated waste liquids and high-water-content sludge using a vacuum distillation method, contributing to the reduction of industrial waste volume and the reuse of wastewater. The drive unit is maintenance-free with only a pump, and pre-adjustment of the treated sludge is unnecessary, allowing for automatic operation in both "batch" and "continuous" modes. Additionally, by adding a weighing unit, the concentration ratio can be set arbitrarily, improving efficiency. 【Features】 ■ Automatic operation in both "batch" and "continuous" modes ■ Maintenance-free drive unit with only a pump ■ Fully automatic operation with an automatic discharge mechanism for residual sludge ■ Possible moisture content of 1-5% in the processed cake ■ In batch operation, adjustment of moisture levels is possible *For more details, please refer to the PDF document or feel free to contact us.

Company：コーワ商事
Price：Other

Water treatment equipment
Drying Equipment
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Turn waste liquid into something valuable! Dehydration and drying device.

★Why not turn the waste liquid you are currently disposing of into something valuable?★ Accepting tests for 10 kg of solid material from 1000 L of slurry liquid in 1 hour.

The "Pleated Filter Dewatering" device allows for the suction filtration of high-concentration slurry (mud-like mixture), forming a cake layer on the filter surface. This formed cake layer is then dewatered and dried, allowing it to be collected as sludge (aggregated solid). Our unique pleated filter enables dewatering and drying in a compact device with a short cycle time. No coagulants or filtration aids are required. The moisture content of the sludge can be as low as 1% for inorganic materials. 【Features】 ■ Individual liquid separation to dewatering and drying in 60 minutes (all-in-one) ■ Compatible with ultra-high concentration turbid water ■ Processing capacity of 400 kg/day (based on processing 1,000 L of 20,000 PPM turbid water) ■ Maintenance requires only filter replacement ◎ For more details, please refer to the PDF document or feel free to contact us.

Company：流機エンジニアリング
Price：Other

Wastewater/wastewater treatment equipment
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Flat Membrane Dehydration Drying Device "Flat Dakkan"

"Dakkan" is now available in a tabletop size! A flat membrane dewatering and drying device suitable for verification before the introduction of Dakkan.

The "Flat Dakkann" is a tabletop-sized flat membrane dehydration and drying device derived from Dakkann, designed for small quantities and diverse research and development applications. Its compact size allows for research and development as well as various sample tests without the need for a dedicated space, thereby improving efficiency. It enables high-performance dehydration and drying easily, allowing for in-house research and development of small quantities and diverse products, which helps reduce costs. 【Features】 ■ Tabletop size ■ Easy high-performance dehydration and drying ■ Cost reduction for small quantities and diverse products in-house ■ Increased efficiency due to no space restrictions *For more details, please refer to the PDF document or feel free to contact us.

Company：流機エンジニアリング
Price：Other

Other metal materials
Testing Equipment and Devices
Wastewater/wastewater treatment equipment
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Slurry liquid up to 1% by mass! "Dehydration and drying device" for waste liquid and discharge liquid.

[Case Presentation] Significantly reduced waste liquid disposal costs. Completed from solid-liquid separation to drying in about 60 minutes. Processing test OK.

The "Pleated Dryer Dehydration" device sucks in and filters high-concentration slurry to form a cake layer on the filter surface. This cake layer is then dehydrated and dried, allowing it to be collected as sludge. It employs patented filter technology to achieve powerful processing capabilities. The compact design integrates a dewatering machine and a dryer, minimizing the installation area. No coagulants or filtration aids are required, contributing to reduced running costs. The moisture content of the sludge has been recorded at around 1% for inorganic materials. 【Features】 ■ Processing capacity of 400 kg/day (when processing 1000L of wastewater at 20,000 ppm) ■ Solid-liquid separation to dehydration and drying completed in about 60 minutes ■ Capable of handling ultra-high concentration slurry ■ Maintenance requires only filter replacement *You can view a case study that includes information about this product from the "Download" section. We also offer sample testing. Please feel free to contact us.

Company：流機エンジニアリング
Price：Other

Wastewater/wastewater treatment equipment
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Patent-acquired technology adopted: Slurry dewatering dryer 'Dakan' for advanced powder materials.

It can perform solid-liquid separation, dewatering, and drying all in one unit, allowing for low-cost operation! Suitable for particle recovery and liquid circulation reuse, etc.

"Dakukan" is an advanced dewatering and drying device for powder materials that can perform solid-liquid separation, dewatering, and drying all in one unit. 【Features of Dakukan】 - Capable of solid-liquid separation, dewatering, and drying in one unit - New technology that supports both powder and liquid recovery - Closed system design to minimize powder exposure - Suitable for small quantities and a variety of products - Compatible with high-concentration slurry - Generally does not require coagulants or filtration aids - Can be installed in narrow spaces - Few moving parts in the main unit, reducing maintenance costs 【Main Challenges for Users】 - Want to recover particles contained in aqueous solutions - Want to remove foreign substances and recycle liquid - Want to perform particle flushing after filtration - Need to perform filtration and drying in one unit due to limited installation space - Do not want to include concentration devices like MF membranes before the filtration unit - Existing devices have high initial costs - Not suitable for small quantities and a variety of products, and maintenance is difficult

Company：流機エンジニアリング
Price：Other

Drying Equipment
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

What is a vacuum dehydration drying device?

Evaporate moisture as much as possible, concentrating and drying! We will also introduce the cost-benefit model of the vacuum dehydration drying equipment.

A "decompression dehydration drying device" is a system that heats concentrated wastewater discharged from factories under reduced pressure, efficiently evaporating as much moisture as possible to concentrate and dry the waste. It can achieve a reduction in industrial waste discharge and significantly lower industrial waste treatment costs. Our company offers analysis of various types of wastewater, cost reduction, zero-emission estimates, simulations, design, construction, and sales. Please feel free to contact us when you need our services. 【Features】 ■ Heats concentrated wastewater discharged from factories under reduced pressure ■ Efficiently evaporates as much moisture as possible to concentrate and dry the waste ■ Achieves a reduction in industrial waste discharge and significantly lowers industrial waste treatment costs *For more details, please refer to the PDF document or feel free to contact us.

Company：東栄産業
Price：Other

Drying Equipment
Other environmental equipment
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study of Introducing a Vacuum Dehydration Drying Device] Semiconductor Component Manufacturing Industry, Company S

The reclaimed water adopts biological treatment in the later stage! An example of reducing the COD value of reclaimed water by cutting the first distillate by 15%.

We would like to introduce a case study of Company S, a semiconductor component manufacturer located in Indonesia, which has implemented a "decompression dehydration drying device." In the company, when introducing a new product manufacturing process, they considered wastewater treatment. They tried various methods, but the COD value became a bottleneck, leading them to ultimately choose treatment through decompression. The recovered water underwent biological treatment in the subsequent stage. The wastewater contained low-boiling-point solvents, and by cutting the initial distillate by 15%, they were able to suppress the COD value of the recovered water. 【Case Overview】 ■ Customer Name: Company S ■ Location: Indonesia ■ Industry: Semiconductor Component Manufacturing ■ Model Introduced: G 750 Type ■ Introduction Date: November 2014 ■ Treated Wastewater: Production Process Wastewater ■ Treatment Volume: 15,000L/day (operating 24 hours/day) *For more details, please refer to the PDF document or feel free to contact us.

Company：東栄産業
Price：Other

Drying Equipment
Other environmental equipment
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study of Introducing a Decompression Dehydration Drying Device] Food Manufacturing Industry, Company M

Activating zero emissions! Introduction of a case study that achieved stabilization of wastewater treatment facilities!

At Company M, a food manufacturing business located in a certain area of Saitama Prefecture, the introduction of a "decompression dehydration drying device" has addressed the high load that rice washing water places on wastewater treatment facilities, which was causing instability in processing capacity. As a result of the introduction, approximately 97% of COD, about 90% of BOD, nearly 100% of SS, and around 99% of n-Hex have been removed, achieving stabilization of the wastewater treatment facilities. Additionally, by intentionally adjusting the residue from the cooking process to a paste-like consistency, it has been converted into a valuable feed for pig farming, promoting zero emissions. 【Case Overview】 ■ Customer Name: Company M ■ Location: Certain area in Saitama Prefecture ■ Industry: Food Manufacturing ■ Model Introduced: G 750 Type ■ Introduction Date: December 2009 ■ Waste Liquid Processed: Rice Washing Water ■ Processing Volume: 15,000L/day (operating 24 hours/day) *For more details, please refer to the PDF document or feel free to contact us.

Company：東栄産業
Price：Other

Drying Equipment
Other environmental equipment
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

『電気式汚泥脱水乾燥装置』

濃縮汚泥の吸い上げから乾燥汚泥排出まで無人自動運転が可能な乾燥装置

『電気式汚泥脱水乾燥装置』は、農業集落排水の排水汚泥、工場排水汚泥を乾燥させて減容化・有効利活用するシステムです。乾燥させることにより汚泥を大幅に減容化することができます。乾燥汚泥には、窒素、リンが豊富に含まれており、肥料として利用できます。また、肥料登録を行うことで農地還元ができます。(生活排水由来の汚泥の場合) 【特長】 ■24時間無人自動運転 ■トラック車載で巡回が可能 ■濃縮汚泥、脱水汚泥両方に対応 ■電気ヒーター加熱方式 ■24時間稼働により、諸規模設備でも大容量の処理が可能 ※詳しくはPDF資料をご覧いただくか、お気軽にお問い合わせ下さい。

Company：関西産業開発営業部
Price：Other

others
Drying Equipment
Wastewater/wastewater treatment equipment
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Application of the Decompression Dehydration Drying Device V-CyCle(R) <Brine and Leachate>

In the desalination concentration of saltwater and leachate, dehydration is possible until it becomes dry salt! By reducing pressure and lowering the boiling point, waste volume reduction is achieved through energy savings.

We would like to introduce the applications of the vacuum dehydration drying device "V-CyCle(R)." Dehydration is possible until the brine and leachate concentrate becomes dry salt. It can handle a wide variety of waste liquids, including the concentration of plating wastewater, recovery of cutting oil from waste oil, concentration and drying of food residues, and dehydration and drying of wastewater treatment sludge. Additionally, it can reduce the volume of various waste liquids, lowering industrial waste disposal costs, or transform waste liquids into valuable resources through concentration. 【Applications】 ■ Reducing disposal costs by minimizing waste liquids ■ Recovering valuable materials by concentrating contained components ■ Recycling recovered water *For more details, please refer to the PDF document or feel free to contact us.

Company：鹿島環境エンジニアリング本社
Price：Other

Wastewater/wastewater treatment equipment
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Application of the Decompression Dehydration Drying Device V-CyCle(R) <Rice Washing Wastewater Treatment>

Available for use as eco-feed in livestock feed! Successful monetization through reduction and feed sales.

We would like to introduce the applications of the vacuum dehydration drying device "V-CyCle(R)." The product can concentrate rice washing water, making it usable as eco-feed for livestock feed. This has successfully led to monetization through reduced wastewater treatment and feed sales. Additionally, it can reduce the volume of various waste liquids (not to be confused with effluent), lowering industrial waste disposal costs, or transform waste liquids into valuable resources through concentration. 【Applications】 ■ Reducing disposal costs by minimizing waste liquids ■ Recovering valuable materials by concentrating contained components ■ Recycling recovered water *For more details, please refer to the PDF document or feel free to contact us.

Company：鹿島環境エンジニアリング本社
Price：Other

Wastewater/wastewater treatment equipment
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Application of the Vacuum Dehydration Drying Device V-CyCle(R) <Food Manufacturing Residues>

Reduction of processing costs through waste volume reduction! Implementing concentration and drying at various levels.

We would like to introduce the application of the vacuum dehydration drying device "V-CyCle(R)" in the processing of food product raw materials. Previously, the used wastewater from a cleaning alcohol aqueous solution (35%) was disposed of entirely as industrial waste. However, by introducing V-CyCle, we have achieved distillation, allowing us to adjust the concentration and reuse it. This has simultaneously reduced the costs of industrial waste disposal and decreased environmental impact through the utilization of recycled alcohol. *For more details, please refer to the PDF document or feel free to contact us.

Company：鹿島環境エンジニアリング本社
Price：Other

Wastewater/wastewater treatment equipment
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Decompression dehydration drying device "V-CyCle(R)"

Simple structure × can be concentrated to high density! Improved heat transfer efficiency through vacuum dehydration allows for a more compact design.

The vacuum dehydration drying device "V-CyCle(R)" is a vacuum-type concentration drying device that is resistant to scaling and capable of dehydrating at high concentrations until solid components precipitate. It features a sealed structure that eliminates odors and uses only quiet equipment. The drive components consist solely of highly durable pumps and stirrers. Additionally, it incorporates a unique stirring and discharge mechanism within the distillation vessel. 【Features】 ■ Compact and space-saving ■ Increased concentration and dehydration rates with a unique stirring and discharge mechanism ■ Simple structure for easy maintenance ■ No odors or noise *For more details, please refer to the PDF materials or feel free to contact us.

Company：鹿島環境エンジニアリング本社
Price：Other

Wastewater/wastewater treatment equipment
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

The vacuum dehydration drying device has been selected for Kansai Monozukuri New Selection 2023!

Achieve a large heat transfer area with low heating, requiring less space and lower costs! Processing tests are also possible.

The vacuum dewatering drying device efficiently recovers only water (concentrates) from various sludges and wastewater, reducing waste. The moisture content of the processed cake can be as low as 1-5%. It achieves a large heat transfer area with low heating, requiring less space and low cost. Processing tests are also possible. 【Features】 ■ Efficiently recovers only water (concentrates) from various sludges and wastewater, reducing waste ■ The moisture content of the processed cake can be as low as 1-5% ■ Achieves a large heat transfer area with low heating, requiring less space and low cost ■ Fully automatic operation in two modes: batch and continuous ■ The drive unit requires no maintenance, consisting only of a pump ■ Residue in the kettle is automatically discharged *For more details, please refer to the PDF document or feel free to contact us.

Company：TAKE-GEN 製造メーカー
Price：Other

Wastewater/wastewater treatment equipment
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study of Introducing a Decompression Dehydration Drying Device] Food Manufacturing Company <Rice Washing Water>

Zero emissions! By adjusting the remaining slag from the furnace to a paste-like consistency, it can be turned into a valuable feed for pig farming.

We would like to introduce a case study of the introduction of the vacuum dehydration drying device "G750 type" to a food manufacturing company. Rice washing water poses a very high load on wastewater treatment facilities and has been a cause of instability in processing capacity. With the introduction of this device, we were able to remove approximately 97% of COD, about 90% of BOD, nearly 100% of SS, and around 99% of n-Hex, achieving stabilization of the wastewater treatment facilities. 【Case Overview】 ■ Introduction Date: December 2009 ■ Treated Waste Liquid: Rice Washing Water ■ Treatment Volume: 15,000L/day (operating 24 hours/day) ■ Volume Reduction Rate: 71.35% *For more details, please refer to the PDF document or feel free to contact us.

Company：TAKE-GEN 製造メーカー
Price：Other

Wastewater/wastewater treatment equipment
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Case Study of Introducing a Decompression Dehydration Drying Device: Metal Material Processing Manufacturer

Significant cost reduction! Achieved zero emissions and successfully reduced volume by over 90%.

We would like to introduce a case study of the introduction of the vacuum dehydration drying device "G1000 type" to a metal materials processing manufacturer. Due to the disposal of 20,000 liters per day of water-soluble rolling oil wastewater, the disposal costs were a significant burden. With the introduction of the device, we successfully achieved a volume reduction of over 90%. Furthermore, the oil content in the residue has a low moisture content and is of high quality, allowing it to be collected as a valuable material, leading to the achievement of zero emissions and significant cost reduction. 【Case Overview】 ■ Introduction Date: March 2012 ■ Waste Liquid Processed: Water-soluble rolling oil wastewater ■ Processing Volume: 20,000 L/day (operating 24 hours/day) ■ Volume Reduction Rate: 93.20% ■ Residue Moisture Content: 1.1% *For more details, please refer to the PDF document or feel free to contact us.

Company：TAKE-GEN 製造メーカー
Price：Other

Wastewater/wastewater treatment equipment
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study of Introducing a Decompression Dehydration Drying Device] Food Manufacturing Company <Waste Jelly>

Grant awarded for the fiscal year 2012 circular economy industrial facility development project subsidy! Significant benefits are being obtained.

We would like to introduce a case study of the introduction of the vacuum dehydration drying device "G300 type" to a food manufacturing company. Before the introduction, a large amount of waste jelly was generated daily, leading to high industrial waste disposal costs. After the introduction, the amount of industrial waste collected was reduced by about 70%, achieving significant reductions in waste output and cost improvements. 【Case Overview】 ■ Introduction Date: December 2012 ■ Waste Liquid Processed: Waste Jelly ■ Processing Volume: 6000L/day (operating 24 hours/day) ■ Volume Reduction Rate: 69.94% *For more details, please refer to the PDF document or feel free to contact us.

Company：TAKE-GEN 製造メーカー
Price：Other

Wastewater/wastewater treatment equipment
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Case Study of Introducing a Decompression Dehydration Drying Device for Food Product Raw Material Processing Manufacturers

Significant cost reduction! A case study of achieving recycling through distillation and concentration adjustment.

We would like to introduce a case where a vacuum dehydration drying device "G150 type (safety explosion-proof)" was introduced to a food product raw material processing manufacturer. Previously, the used cleaning alcohol aqueous solution (35%) was disposed of as industrial waste in its entirety. We achieved regeneration and reuse through distillation and concentration adjustment. Additionally, this resulted in a significant reduction in industrial waste treatment costs. 【Case Overview】 ■ Introduction Date: March 2014 ■ Treated Waste Liquid: Regeneration of cleaning alcohol aqueous solution ■ Treatment Volume: 2760L/day (operating 20 hours/day) ■ Volume Reduction Rate: 94.25% *For more details, please refer to the PDF document or feel free to contact us.

Company：TAKE-GEN 製造メーカー
Price：Other

Wastewater/wastewater treatment equipment
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study of Introducing a Decompression Dehydration Drying Device] Semiconductor Component Manufacturing Manufacturer <Process Waste Liquid>

The waste liquid contains low-boiling-point solvents, and by cutting the first distillate by 15%, the COD value of the recovered water is suppressed!

We would like to introduce a case study of the introduction of the vacuum dehydration drying device "G750 type" to a semiconductor component manufacturing company. When implementing a new product manufacturing process, the company considered wastewater treatment and tried various methods, but the COD values became a bottleneck. Ultimately, they chose to process the wastewater with the vacuum dehydration drying device, and biological treatment was adopted for the recovered water in the subsequent stage. 【Case Overview】 ■ Introduction Date: November 2014 ■ Treated Wastewater: Production Process Wastewater ■ Treatment Volume: 15,000L/day (operating 24 hours/day) ■ Volume Reduction Rate: 96.42% *For more details, please refer to the PDF document or feel free to contact us.

Company：TAKE-GEN 製造メーカー
Price：Other

Wastewater/wastewater treatment equipment
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Gift of Case Studies! Drying and volume reduction of moisture-containing residues.

We will introduce examples of reducing industrial waste costs and converting residual materials into feed to contribute to the creation of valuable resources.

We would like to introduce a case study from Ryuki Engineering, which proposes a reduction in the running costs of water treatment. We received a request from a food processing factory to dry and reduce the weight of their residual materials in order to cut disposal costs. 【Case Study】 ■Industry: Food Processing Factory ■Challenges - When disposing of residual materials (press cake), the disposal fee is determined by weight, leading to high costs for disposing of moisture-laden residuals. - They wanted to dry and reduce the weight of the residual materials to cut disposal costs. To further enhance the efficiency of processing the juice generated during the drying process, we proposed a combination of dewatering and ECO Clean. This not only reduced industrial waste costs but also contributed to converting the dried residuals into animal feed, generating valuable by-products. *For more details, please refer to the PDF document or feel free to contact us.

Company：流機エンジニアリング
Price：Other

Water treatment equipment
others
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Features of the vacuum dehydration drying device

Prevent scaling (burning) with a Teflon scraper! We will also introduce some trivia!

The "Decompression Dehydration Drying Device" features a unique stirring and discharge screw built into the distillation kettle, making it resistant to scaling (burning). Its simple structure allows for very easy handling, and the angled stirring enables automatic discharge of distillation residues. Additionally, as a tidbit about this product, the "stirring blades" are designed to constantly scrub the inner walls of the distillation kettle with Teflon plates to prevent the precipitated residues from sticking, and the blades are angled to direct the residues to the discharge outlet for automatic removal. 【Features】 ■ Unique stirring and discharge screw (Teflon plate) built into the distillation kettle ■ Resistant to scaling (burning) ■ Automatic discharge of distillation residues with angled stirring ■ Very easy to handle due to its simple structure *For more details, please refer to the PDF document or feel free to contact us.

Company：東栄産業
Price：Other

Drying Equipment
Other environmental equipment
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Introduction of vacuum dehydration drying equipment results

We have a proven track record in the processing of metal materials and the manufacturing of semiconductor components! We also introduce a wide range of products.

The "Vacuum Dehydration Drying Equipment" that we handle has a total of 352 units installed as of April 30, 2021, with 264 units in Japan and 88 units overseas. We have various installation records, including M Company in the food manufacturing industry, O Company in the food product raw material processing industry, and S Company in the semiconductor component manufacturing industry. At O Company, a stainless steel product manufacturer located in Okayama Prefecture, they adopted our equipment for treating rinse water discharged from the cleaning process of their product production as they constructed a new factory. Compared to conventional wastewater treatment facilities, our equipment is very compact, takes up little space, and is easy to manage, which has been greatly appreciated. 【Installation Records (Partial)】 ■ Food Manufacturing Industry: M Company ■ Metal Material Processing Industry: A Company ■ Food Manufacturing Industry: B Company ■ Food Product Raw Material Processing Industry: O Company ■ Semiconductor Component Manufacturing Industry: K Company *For more details, please refer to the PDF document or feel free to contact us.

Company：東栄産業
Price：Other

Drying Equipment
Other environmental equipment
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study of Introducing a Decompression Dehydration Drying Device] Metal Material Processing Industry, Company A

Achieving zero emissions through significant cost reduction! Introducing a case study that successfully achieved over 90% volume reduction!

We would like to introduce a case study of Company A, a metal materials processing company located in Shizuoka Prefecture, which has implemented a "decompression dehydration drying system." The company was previously outsourcing the treatment of 20,000 liters per day of water-soluble rolling oil wastewater, resulting in significant disposal costs. However, with the introduction of the system, they successfully achieved over 90% volume reduction. Furthermore, the oil content in the residue has a low moisture content and is of high quality, allowing it to be collected as a valuable material, leading to the achievement of zero emissions and significant cost reductions. 【Case Overview】 ■ Customer Name: Company A ■ Location: Shizuoka Prefecture ■ Industry: Metal Materials Processing ■ Model Introduced: G 1000 ■ Introduction Date: March 2012 ■ Wastewater Treated: Water-soluble rolling oil wastewater ■ Treatment Volume: 20,000 liters/day (operating 24 hours/day) *For more details, please refer to the PDF document or feel free to contact us.

Company：東栄産業
Price：Other

Drying Equipment
Other environmental equipment
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study of Introducing a Decompression Dehydration Drying Device] Food Manufacturing Industry, Company B

After implementation, the amount of industrial waste collected decreased by about 70%! A case that achieved significant reductions in industrial waste emissions and cost improvements.

We would like to introduce a case study of Company B, a food manufacturing business located in a certain area of Yamagata Prefecture, which has implemented a "decompression dehydration drying device." Before the implementation, the company generated a large amount of waste jelly every day, leading to high industrial waste disposal costs. However, after the implementation, the amount of industrial waste collected was reduced by approximately 70%, achieving significant reductions in waste output and cost improvements. Additionally, at the time of implementation, the company received a grant from the "Fiscal Year 2012 Subsidy for the Development of Recycling-Oriented Industrial Facilities," resulting in even greater benefits. 【Case Overview】 ■Customer Name: Company B ■Location: Certain area in Yamagata Prefecture ■Industry: Food Manufacturing ■Model Introduced: G 300 Type ■Implementation Date: December 2012 ■Waste Liquid Processed: Waste Jelly ■Processing Volume: 6000L/day (operating 24 hours/day) *For more details, please refer to the PDF document or feel free to contact us.

Company：東栄産業
Price：Other

Drying Equipment
Other environmental equipment
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study of Introducing a Decompression Dehydration Drying Device] Food Product Raw Material Processing Industry, Company O

Achieving recycling through distillation and concentration adjustment! A case of significant reduction in industrial waste disposal costs.

We would like to introduce a case study of Company O, a food product raw material processing business located in Gunma Prefecture, which has implemented a "decompression dehydration drying device." Previously, the company disposed of all used cleaning alcohol aqueous solution (35%) as industrial waste, but they achieved recycling by distillation and concentration adjustment. As a result, there was a significant reduction in industrial waste disposal costs. 【Case Overview】 ■ Customer Name: Company O ■ Location: Gunma Prefecture ■ Industry: Food Product Raw Material Processing ■ Model Introduced: G 150 Type (Explosion-proof) ■ Introduction Date: March 2014 ■ Waste Liquid Processed: Recycled Cleaning Alcohol Aqueous Solution ■ Processing Volume: 2760L/day (20H/day operation) *For more details, please refer to the PDF document or feel free to contact us.

Company：東栄産業
Price：Other

Drying Equipment
Other environmental equipment
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study of Vacuum Dehydration Drying Equipment Introduction] Semiconductor Component Manufacturing Industry, Company K

The reduction rate is 96.42%! Introducing a case study that achieved simplified processing and significant cost reduction!

We would like to introduce a case study of Company K, a semiconductor parts manufacturer located in Nagano Prefecture, which has implemented a "decompression dehydration drying device." Previously, the company processed using a microflow → filter press → disk dryer, but by consolidating the previous processes into one machine, they achieved simplification of processing and significant cost reduction. After the implementation, they are exploring the recovery of valuable residues from the kettle, and if realized, the benefits of the implementation are expected to increase further. 【Case Overview】 ■ Customer Name: Company K ■ Location: Nagano Prefecture ■ Industry: Semiconductor Parts Manufacturing ■ Model Introduced: G 500 ■ Introduction Date: October 2014 ■ Waste Liquid Processed: Plating Process Waste Liquid ■ Processing Volume: 10,000L/day (24 hours/day operation) *For more details, please refer to the PDF document or feel free to contact us.

Company：東栄産業
Price：Other

Drying Equipment
Other environmental equipment
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Application of the vacuum dehydration drying device V-CyCle(R) <Water-soluble cutting oil waste liquid>

Even waste liquid contaminated with foreign substances like Kiriko can be dehydrated and reduced to the extreme!

We would like to introduce the applications of the dewatering and drying device "V-CyCle(R)." Even waste liquids contaminated with foreign substances such as glass shards can be dehydrated to the extreme, allowing for significant reduction in weight. This greatly contributes to waste volume reduction. Additionally, it can reduce the volume of various waste liquids (not to be confused with effluent), lowering industrial waste disposal costs, or transform waste liquids into valuable resources through concentration. [Applications] ■ Reducing disposal costs by minimizing waste liquids ■ Recovering valuable materials by concentrating contained components ■ Recycling recovered water *For more details, please refer to the PDF document or feel free to contact us.

Company：鹿島環境エンジニアリング本社
Price：Other

Wastewater/wastewater treatment equipment
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Decompression dehydration drying equipment manufacturer <Exhibition participation>

Achieve a large heat transfer area with low heating, requiring less space and lower costs! Processing tests are also possible.

The vacuum dewatering drying device efficiently recovers only water (concentrates) from various sludges and wastewater, reducing waste. The moisture content of the processed cake can be as low as 1-5%. It achieves a large heat transfer area with low heating, resulting in a compact design and low cost. Processing tests are also possible. 【Features】 ■ Efficiently recovers only water (concentrates) from various sludges and wastewater, reducing waste ■ The moisture content of the processed cake can be as low as 1-5% ■ Achieves a large heat transfer area with low heating, resulting in a compact design and low cost ■ Fully automated operation in two modes: batch and continuous ■ Maintenance-free drive system with only a pump ■ Automatic discharge mechanism for residuals in the vessel *For more details, please refer to the PDF document or feel free to contact us.

Company：TAKE-GEN 製造メーカー
Price：Other

Wastewater/wastewater treatment equipment
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Case Study of Introducing a Decompression Dehydration Drying Device: Semiconductor Component Manufacturing Company

Reduction rate of plating process wastewater is 96.42%! By consolidating the previous processes into one machine, we achieved simplification of treatment and significant cost reduction.

At Company K, a semiconductor component manufacturing manufacturer, they were processing 10,000 liters per day of wastewater from the plating process. Previously, they processed it using a microflow → filter press → disk dryer, but after introducing the vacuum dehydration drying device "G 500 model," they consolidated the previous processes into one machine, achieving simplification of processing and significant cost reduction. 【What is a vacuum dehydration drying device?】 It is a device that efficiently recovers (concentrates) only water from various sludges and wastewater, reducing waste. It lowers the treatment costs of wastewater discharged from factories and enables resource reuse. *For more details on the case, please download the PDF. Feel free to contact us with any inquiries.

Company：TAKE-GEN 製造メーカー
Price：Other

Wastewater/wastewater treatment equipment
Dehydration dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dehydration dryer Product List and Ranking from 7 Manufacturers, Suppliers and Companies | IPROS GMS

Dehydration dryer Manufacturer, Suppliers and Company Rankings

Dehydration dryer Product ranking